Motorcycle accessories like helmet are a matter of personal taste. In that case, aesthetic side is often chosen over anything else. Anyhow, this has contributed why safety is most of the time overlooked. Whatever the case may be rider’s safety must be the topmost priority.
In a study conducted by the NHTSA, DOT National Highway Traffic Safety US Department of Transportation, they have subjected 50 motorcyclists, of varying age and riding experience to a test. They were made to ride along a prescribed test route. Then, they were asked to periodically change lanes and their head to check traffic in the adjacent lane. Afterwards, they were made to change lane in their normal manner. The riders have driven the route three times, full and partial helmet on, and on the third time, without wearing a helmet. The ability to hear surrounding traffic was also altered systematically.
The study found out that helmets are not hindrance to motorcyclist’s ability to hear and observe surrounding traffic. In connection with the hearing tests, no significant difference was found in rider's ability to hear traffic, either between helmet types or between helmet and no helmet. Hearing ability, on the other hand, was significantly affected by vehicle speed due to increased wind noise. However, for any given speed, helmets did not diminish nor enhance hearing. In connection with the vision tests, it showed that the minimal amount of the lateral vision (field of view) that is sacrificed by wearing a helmet can be made up by turning the head a little further.
Further, the study showed that 19 of the 23 riders who were given the vision tests compensated for helmet use by turning their head a little further before changing lanes.
Overall, any negative effect of helmets on rider vision appears to be very minor, especially in comparison to the protection offered by helmets should a crash occur. Wearing helmet is a rider’s expression. The helmet itself is an expression of what kind of rider he is.
There are different styles and designs available in motorcycle stores these days. Colors range from classic solid colors to domineering neon and luminous colors to promote conspicuity. There are also replicas that look like ‘super bike champ wear’. Further, there are a lot more helmet to choose from.
¶ 8:44 AM 3 comments
Motorcycle boots are important riding apparel and accessories. They protect you, they make you shine! Some of the established names of motorcycle boots manufacturer are Alpinestars, Agvsport, Icon, Double H. They have different styles, colors and fit of motorcycle boots. Classic fanatic can go for Harley Davidson engineer boots.
Alpinestars has launched to market a supertech boot which has removable liner. Its inner structure is biochemically designed. In fact, it has a patent pending lateral torsion bar system in its internal brace to give maximum ankle support. The usual features like aluminum heel slider and ventilated heel guard are still included.
Agvsport has also a wide-range of motorcycle boots. The footwear line especially the boots are trendy, some are waterproof. Boots are flashy and stylish. You can wear it, during race time and some for the day in day out activities as a rider. Riders can choose from the colors and designs made available by Agvsport.
When it comes to Icon, they are known as the makers of short boots. Icon has this armor and reinforcing feature integrated in to the boots. The boots are durable and elegant.
Aside from Harley Davidson, great line of classic boots is also made available by Double H. They differs from other boots in the sense that it uses classic buckle and strap look. These boots are catered to both the gents and the lady riders.
Rugged fashion, wild ride! That’s what you’ll gonna experience when you are in your untamed riding mood and dressed in a complete line of motorcycle accessories and apparel. Keep kickin’! ¶ 8:43 AM 0 comments
Reading Between the Tires
Every rider must have knowledge about tires which are very essential motorcycle accessories. They must know its construction, its maintenance and care, how to mount and dismount it, how to troubleshoot and to take precautions. To do it here are the areas that need to be known by them:
2. Pressure. Pressure increases with temperature. Thus, a rider must check tires regularly especially during winter season. Advisable tire pressures can be found on the manufacturer's reference table. Check them out in order to have a safe tire pressure.
Never bleed air from a hot tire. Also avoid riding when tires are underinflated because this can lead to premature wear, tire failure and damage to the carcass.
3. The Wear. Regularly inspect the wear indicator in the tire grooves. You will know that the tire should be replaced if the wear indicators are leveled with the surface of the tread at any point.
4. The Valve. Always use valve caps to prevent air loss and to avoid dirt from entering the valve.
5. Warm-up. Each time you ride on your motorcycle, always begin at a moderate speed. This will gradually condition the tires up to their normal operating temperature. If they have already achieved a full warm-up then they will have an optimal grip.
6. Break-in. After warming up, avoid rapid acceleration or hard cornering. Do this for the first 50 kilometers of your ride up to the extent when the tread area is totally worn off.
7. Repairs. Try to learn the basics of motorcycle repairs so that you will not be groping in the dark when discrepancies occur. Another option is to consult tire experts to attend to tire repairs.
Bike accessories' language is easy to comprehend. Even just by staring at it, you can already grasp the message. Just the mere spark plug color can determine the condition of the bike. Spark plugs change color and that change goes along with its condition. Here are their colors and their corresponding state. :
2. White. This color is caused by the overheating of the engine. Repair of the engine must be reorted to avoid damage to the engine. The plug may turn white when there is leaking crankshafts seals, base or head gasket leaks, no oil, cooling problems, low octane fuel, time not set and too much air/fuel mixture in carburetor.
3. Tan. The engine is normal and the mixture of air/fuel is right when the color of the plug is tan. If a rider intends to replace it, it must be replaced by a plug with the same heat range. New plug have square edges to help the plug fire better.
Rate Yourself –Where do you belong?
There are many factors where you can gauge your standing as a rider. Here they are:Experience. Driving defensively must be the rider’s priority. This is to avoid mishaps and other irrational consequences. An experienced rider is an expert when it comes to quick turns, quick stops, and handling curves, bends and the likes. In other words, he has thorough knowledge of his motorcycle.Skill. Aside from the vital maneuvers, cautiousness and alertness are the skills that need to be mastered by a rider. Recklessness and laxity may bring about collisions and other untoward accidents. Thus, a rider who is reckless and lax is not worthy of driving because he may endanger the lives of others.Compatibility. Motorcycles and drivers need be compatible. The rider must take care of his motorcycle before the latter can transport him safely. Regular maintenance is a must. Properly maintained motorcycle creates an impression of a ruggedly handsome rider.Attitude. A responsible rider never drives when intoxicated or under the influence of alcohol. He also knows how to combat fatigue, stress and sleepiness. Another important point is the attitude to be always safe. In this regard, the use of motorcycle apparel and accessories are indispensable.If you are going to rate yourself from 1-10, ten being the highest, what rate are you deserving of?
¶ 11:10 AM 3 comments
Who Can You Bank On?
We drive because we want to experience riding adventures. We ride because it’s our passion and to take it away from us would mean doom and sacrifice. We drive simply because we love it. Some riders may say that they want thrill, considerate pain but certainly death does not come in their preferences.
To be injured or fatally wounded is a big deal. The same thing applies when you injure another or caused his untimely death. In this case, when every circumstance is against you, as a rider, what will you do? Who can you turn to?
According to statistics, 60 per centum of all reported motorcycle accidents result in injury or death. Approximately 2,000 motorcyclists are killed each year. On the other hand, more than 50,000 are injured in traffic collisions each year. Guess what’s the leading cause of death? – Its head injury. I for one use Shoei motorcycle full face helmets accessories to keep me away from the peril of death.
But let’s face it, what if we are faced with the aforementioned dilemma? You will probably ask questions like who’s goin’ to pay the medical bills and the likes?, where can I get money?, etc…
The best thing to do is to acquire the services of a personal injury attorney. It’s hard to take chances at this crucial point. You do not know what papers to sign and not to. You do not know the defenses. You do not even know how to start a claim. Another thing is that, you do not know up to what point you are liable or entitled to damages.
This situation needs a lawyer to help you out and exit the situation meritoriously!
¶ 11:09 AM 0 comments
Rider’s Armor saves my Ride
Every time I go out with my motorcycle, I am always prepared with my armor against accidents and annoying incidents. My armor is the volition of being prepared all the time. And how do I carry out the rider’s armor?I follow the rules of the road. What are my must haves? I had a license. My license is a sure guarantee that I passed the standards to safely maneuver my motorcycle. I even had a motorcycle safety course to be adept in driving. Practice and more practice – that’s my goal during the early phase of my driving. Another group of must haves are quality gears –helmets, jacket, gloves, chaps and boots. They protect the riders against cold, fall and injuries.What are the must’s in riding? You must be visible. I use bright, glow in the dark, if not neon Dunlop motorcycle accessories they kept me visible even in the darkest nook of the streets. Also, riding with your headlight on is a must.What are my no-no’s? One of my ideals is not to over speed. Riders don’t know the importance of driving with the right speed to accommodate a safe distance and to be alert to the passersby and other automobiles on the road.Another no-no is drinking alcohol and other drowse causing medicines. This is one of the top reasons why collisions and other accidents happen.When I drive, I try to be cautious, aware and mindful of my surroundings. That’s the surest way to go home intact and breathing easy!
¶ 11:08 AM 0 comments
How do you handle a ‘right-after accident’ situation? Will you just sigh? Stand there stupefied? Well, you’ve got to do something, man!
If the accident involves casualties, here are the things that you must do:
1. Immobilize the casualties. This will prevent aggravation of any injury or bone fracture. More support is needed on the spinal cord, neck, and head. If the injured is wearing a helmet do not remove it. Keep it still.
2. Ask for medical assistance. Request for an ambulance as quickly as possible.
3. if the casualty asks about his motorcycle, give them an honest answer so that he will no longer try to stand and check it by himself.
4. If the casualty is worried about his motorcycle assure him that it will be alright. Do not let him stand to find his motorcycle because that would further aggravate his condition. Remember that injuries are not always apparent. He may be suffering an internal breeding, concussion or sever fracture he had no idea of.
5. Do not leave the casualty until medical staff comes in.
The best thing to avoid accidents is to use quality motorcycle accessories and parts. Your life is too precious to be risked. Motorcycle accessories and parts can very well safe your life from the brink of death… ¶ 5:21 PM 0 comments
It’s a natural thing for our fingers to feel numb when exposed to too cold places. Even if you are wearing heavy gloves which may include liners, this can still happen. If you are experiencing this, well you are not alone in this predicament. The best thing to do next is to provide a remedy.
How do we circumvent numbness of the fingers? Well, I discovered an alternative to ease our fingers. First, you put on the cloth or silk liners (personally, I prefer the latter). Then, don a set of latex gloves over the liners. Finally, put on your regular gloves over the latex ones. Carry a set of latex gloves whenever you plan to conquer the road during winter. This simple idea can enormously free your numbing fingers from the freezing coldness of winter!
Also bear in mind that your hands are not your only concern. Protect your whole body from injury and damage. Use quality and durable brand of motorcycle accessories available either in your friendly motorcycle stores or online. Motorcycle accessories will help you enjoy your ride hassle-free and worry-free! ¶ 5:20 PM 0 comments
Here’s the list of safety road tips to keep you away from trouble and most of all from accidents:
1. Observe all the traffic rules and signs.
2. Keep a safe distance from vehicles in front of you. Whenever you see cluster of cars ahead try to slow down because this might be an indication of an accident and you don’t want to go on a collision, right?
3. Check your mirrors from time to time to see passing vehicles.
4. Use quality motorcycle accessories.
5. Keep on the side where the driver of the vehicle in front of you can visibly see you. This rule depends on what country you’re in because there are some countries that make use of right-hand drive vehicles while in some countries its left-hand drive.
6. Always makes use of your signal light to warn approaching vehicles that you’re about to take a turn or to change lane.
7. Turn off you cell phones so as to avoid destruction while you’re driving.
8. Drive only when you are sober. Don’t when you are intoxicated.
9. Be considerate of the pedestrians crossing.
It is still nice to have dependable tips, street motorcycle accessories and parts. The next time you go out for a drive just remember the aforementioned tips because trivial as you deemed it can actually save lives especially your life. ¶ 3:33 PM 0 comments
Just what matters most in motorcycle? Is it speed or is there something more?
Now, this doesn’t mean that you are not going to buy any motorcycle accessory for your bike. However, it is imperative that you know just what motorcycle accessories you need and suppose to buy. Here’s a list of must have motorcycle accessories:
1. Suspension is one of the not so famous motorcycle parts that’s why most riders often times forget the importance of suspension on their bikes. Suspension can increase the speed of motorcycles. Nonetheless, it is not advisable to buy full suspension components since stock suspension can still be used. You only have to use components like the gold valve emulators in order to improve your stock equipment.
2. There are different tires for different types of terrain. It is important that you have knowledge on what type of tire is applicable to a certain type of terrain in order to enhance your bike’s capacity to trail various terrains.
Furthermore, whatever street motorcycle accessories you may want to buy and add to your motorcycles just make sure that they are in accordance to the specification of your bike. This way you can minimize the quick wear and tear of your bike and at the same time you also ensure your safety. Riding a bike is an invigorating experience, one that can be treasured. So be wise, drive safely and choose street motorcycle accessories wisely. Shun away from those you don’t need and stick only to those you need. ¶ 3:32 PM 0 comments
Powder coating is one of the best painting technique out there however not everybody is aware of it. The preparation includes the stripping of the motorcycle parts of all its paint. It is very important that the motorcycle parts to be coated must be entirely stripped of any remaining paint, dirt, oil and any other substance. Sandblasting is required to completely clean the motorcycle parts. Afterwards, the motorcycle parts are going to be baked to get rid of the moisture from the metal. The motorcycle parts are now treated with degreasing solution to prevent from rusting.
The process of powder coating is used especially for selected motorcycle parts in which they are coated with fine powder of resin as well as pigment which is more of a ground up paint grains that form a powder-like substance. The items being coated are then hanged on a rack which grounds the item. A spray gun is then used to spray the powder onto the motorcycle parts. Afterwards, spraying on the motorcycle parts, these are then baked on a large oven in order to cure the coating. The usual temperature used for curing is between 400 and 450 degrees. Another purpose of curing and baking the motorcycle parts is to melt the pigments, melt the gel in order to come up with a hard-wearing finish. The end product is an even coating.
Now, you know… Thanks to the article I’ve read on the Net about the proper motorcycle accessories. All of us became aware of its worth.
This article was provided by street motorcycle accessories - the maker of a wide-variety of street motorcycle accessories. ¶ 3:30 PM 0 comments
